How To Use The Puffco Pivot: A Complete Guide

6 min reading time

The Puffco Pivot is Puffco’s latest Vaporizer to hit the market, designed specifically for concentrate connoisseurs looking for a portable device. With its 3D heating chamber, portable design and real time temperature control, the Puffco Pivot allows you to enjoy a premium concentrate experience no matter where you are.

In this user guide, we’ll walk you through how to use the Puffco Pivot, from initial setup to cleaning, so you can get the most out of your device and keep it in perfect condition. So let’s get started and open it up!

Whats in the Box?

When you unbox your Puffco Pivot, you’ll find:

A Pivot 3D Chamber with Mouthpiece
Pivot Base
USB-C Charging Cable
Cotton Swabs
Loading Tool

Now that you’ve got everything, let’s set up your device.

Step 1: Charging Your Puffco Pivot

Before your first session, fully charge your Pivot using the included USB-C cable. The device features an LED light bar that indicates the battery level:

Green: Fully charged
Orange: Half battery
Red: Low battery

A full charge takes approximately 90 minutes and provides up to 15 heating cycles per session.

Step 2: Turning the Device On/Off

To power the device:

Press and hold the button for 3 seconds.
To turn it off, hold the button for another 3 seconds.

Step 3: Loading Your Concentrate.

Flip open the mouthpiece to reveal the 3D Chamber.
Use the included loading tool (or your preferred Dab Tool) to place a small amount of concentrate onto the bottom of the chamber and close the mouthpiece securely. Avoid overfilling the chamber.

Step 4: Choosing Your Heat Setting

The Puffco Pivot has four different heat settings, so you can customise your experience based on your vapor production and flavour preference:

Heat Level	Color	Temperature	Best For
Low	Blue	500°F	Maximum flavour, least vapor
Medium	Green	520°F	Balanced flavour and vapor
High	Red	540°F	Stronger vapor production
Peak	White	585°F	Maximum vapor and intensity

To change the heat setting:

Single click the button to toggle through each setting.

Step 5: Starting a Heat Cycle

Double-click the button to start the heating cycle, the light bar will fill to indicate heat up.
The device will flash and vibrate twice when ready to use.
Hold the Pivot upright inhale gently and enjoy!
The light bar will slowly empty to indicate the remaining dab time.

Boost Mode: Extra Power When You Need It

Want a longer and hotter hit? Try Boost Mode:

Double-click the button again during an active heat cycle (The temperature will increase by 18°F, and session time will extend by 15 seconds).

How to Remove/Reinsert the 3D Chamber

Remove 3D Chamber from the Pivot Mouthpiece by opening the top and gently pushing the metal chamber up from the bottom with a soft tool. Do not use a sharp or metal object as this could damage the chamber.

How to Clean Your Puffco Pivot

Keeping your Puffco Pivot in good condition is essential for prolonging the life and performance of your device. Follow these easy, effective cleaning tips to ensure your Pivot always performs at its best.

Quick Clean (After Each Use)

Clean 3D Chamber after each use with a cotton swab. Wipe gently in a circular motion while chamber is warm to remove any leftover residue.

Deep Clean

A good practise is to clean the Pivot thoroughly each time the battery is fully drained and needs to be recharged. This will clear any residue and help keep your device in great condition.

Chamber:

Detach the chamber from the mouthpiece.
Soak it in 90%+ Isopropyl Alcohol for 20–30 minutes.
Place upside down and let it dry completely before reuse.

Base:

Use a cotton swab dipped in 90%+ Isopropyl Alcohol to clean the threading and connection points.

Mouthpiece:

Soak in 90%+ Isopropyl Alcohol for 20–30 minutes.
Rinse thoroughly with water, then place upside down to dry fully before using again.

Troubleshooting Common Issues

Device flashes white 4 times: No chamber detected. Remove and reinsert the chamber.

Device flashes red & white alternately: Chamber error. Clean and reinstall the chamber.

Device flashes red for 5 seconds: Device overheating. Let it cool down before using.

Device flashes red 3 times: Low battery. Charge your device.

Puffco Pivot FAQ

Here’s answers to some of the most commonly asked questions about the Puffco Pivot.

How long does the Puffco Pivot battery last?

A fully charged Puffco Pivot provides up to 15 heating cycles per session, depending on the heat setting used.

Can I use dry herbs in the Puffco Pivot?

No, the Puffco Pivot is designed only for concentrates. Using dry herbs may damage the chamber.

How do I know when my device is fully charged?

The LED light bar indicates the battery status:

Green: Fully charged

Orange: Half battery

Red: Low battery

What should I do if my Puffco Pivot isn’t heating?

If your device isn’t heating:

Ensure the chamber is properly connected.
Check if the battery needs charging.
If the device flashes red & white, clean the chamber and reconnect it.

How often should I clean my Puffco Pivot?

For the best performance, quick clean the chamber after every session with a cotton swab. A deep clean (soaking parts in isopropyl alcohol) is recommended every few uses.

What does Boost Mode do?

Boost Mode increases the temperature by 18°F and extends the session time by 15 seconds, delivering bigger and stronger hits.

Can I use the Pivot while charging?

No, the Puffco Pivot does not support pass-through charging. You’ll need to wait for it to charge before using it.

Where to Buy Puffco Pivot UK?

If your in the UK and haven’t picked up your Puffco Pivot yet, now is the perfect time! At Vaporoni, we offer free Puffco Pivot UK Tracked Delivery to ensure your order arrives safely and on time. All orders are shipped from our mainland UK warehouse, via your chosen shipping method. If you have any questions about the Pivot or any other devices, feel free to reach out to our friendly customer support team via the Contact Page or Live Chat function, and we’ll be happy to assist you.